Product Description
Bostitch SB-HC50FN Concrete Block Nailer
Features
- Designed to drive tungsten hardened nails into almost all forms of concrete block.
- Can fix door liners into block and gripper rods into floor screeds.
- It is not recommended to use this tool to drive nails into any form of strengthened concrete or engineered and glazed bricks.
- Aluminium Housing
- Rubber Comfort Grip
- No-Mar-Tip
- Dial-A-Depth
- Adjustable Exhaust
- Sequential Trip
- Bottom Loading
- Carry Case
Technical Specification
| Power type | Pneumatic |
| Weight | 1.98 kg |
| Width | 76 mm |
| Length | 293 mm |
| Height | 275 mm |
| Magazine capacity (max) | 100 |
| HCFN Series Fasteners: | |
| Diameter (mm) | 1.8 (min) |
| Length (mm) | 20 (min) |
| Head (mm) | 2.8 (min) |
| Collation angle | 0 |
| Operating pressure | 5.00 – 7.00 BAR |
| 72.00 – 100.00 PSI | |
| Air Consumption Ltr.per shot @ 5.6 bar | 1.6 |
| Air fitting thread type | 1/4 BSP |
| Noise LPA 1sd | 96.8 |
| LWA 1sd | 100.3 |
| LPA 1s, 1m | 87.3 |
| Vibration / Uncertainty | 2.13 / N/A m/s2 |
